Tuesday, March 1, 2011

MCELROY "JUNIOR," AGAIN

I have written of them in the past and a reader recently pointed out another one: the McElroy "Junior," a semi-automatic telegraph key built for the ham or telegrapher of limited means.

The base and frame were made of stamped and welded sheet metal and they were the least-expensive bug ever made. They're also vanishingly rare, which leads to an interesting quirk: while you can find a nice Mac "T-bar" bug for about $500 and his high-end models for up to a couple hundred more, the humble little "Junior" sells for as much as -- see for yourself:Yes, that's $1026.01. I did not bid on it; bidding rises early on these and keeps on going up.

I do note, very typical of McElroy, that the inner construction appears to be quite robust and seems to include some kind of additional pivot support; mechanically it is a better key than first glance might suggest.

Sunday, February 27, 2011

NEW? OLD? USEFUL!

What fits in a mint tin and lets the 19th Century communicate with the 21st?

It's not a real riddle, it's the Morse key USB keyboard! A nifty little interface that connects to a telegraph key on one end and on the other, tells your computer it's a USB keyboard.

While first at glance you might see only hobbyist fun (and big fun indeed for some of us), there's a serious side to this kind of interface, too: persons with limited mobility or strength who are unable to use a conventional keyboard can use a telegraph key. It has been done before, usually in the form of software running on a dedicated machine with a specialized interface; this is plug'n'play, portable. USB connection, Dr. Hawking?

Downside, you'll need the hardware/software to flash an Arduino-compatible microcontroller. Or know someone who can.

Update: If you'd like to match this to a landline telegraph sounder, Jake von Slatt's sounders are a scratch-built solution; the morse2led software he uses to drive them (from a keyboard led) would also work a commercial sounder, piezo buzzer or electromagnetic buzzer, though you might have to fiddle with the drive ciruits a little.

If you were wondering, yes, there is Morse telegraphy on the Internet. The software is free. The linked page, at the wonderful Morse Telegraph Club website, will guide you to sites and software, some using landline (or American) Morse and others using radio (or International) telegraph codes

Tuesday, February 8, 2011

GET YOUR POLAROID BACK OUT

Yes, even the SX-70: The Impossible Project is making film for them! And for a number of other classic Polaroid cameras.

Polaroid themselves got out of the instant film business in 2008; a group of enthusiasts bought up the machinery from the last few plants, leased space from Polaroid and...started from scratch on the chemistry: Polaroid had made their own dyes, etc. and it was information they couldn't share. It seemed impossible -- but it wasn't.

A couple of years ago, I packed away my Dad's old SX-70, thinking it was long odds it would ever take another photograph. Looks like I was wrong.

It's not that "retro," but it was a lost technology and now it's back. It will probably never again be the preferred choice for vacation snapshots but it is certainly nice to have the option.

(First found here, thanks to her).

Monday, February 7, 2011

TOY STEAM

I only know what I have seen on their website, but MiniSteam has me totally enthralled: more tabletop steam (and everything from Stirling to internal combustion) engines than I have ever seen in one storefront, from a huge variety of makers. Even steam robots -- see for yourself.

There and elsewhere, my dream toy for the summer, a Stirling-engine fan.

Prices on many of them are not for the faint of heart -- but it's wonderful stuff to see.

Tuesday, January 11, 2011

WE302

WE302? The standard desk phone. The 500-series phone that followed was just the same thing slicked-up for the sixties.

I've got one. If you call Roseholme Cottage (CLifford 3-....), that's what gets picked up. Blogger Keads has one, too -- with the original number card!

Treated well, a Western Electric 302 is nearly indestructible. Most phone systems will still accept pulse-dialing, too, and for the ones that don't, you can get magic pulse-to-touchtone widgets. The cloth cords can fray over time; Phoneco will sell you new ones, with all the proper lugs and anchors.

Monday, November 29, 2010

MORE BOOKSHELVES

I replaced a too-wide set of shelves between the doorways to the kitchen and the attic, then added an over-door shelf: Dinner dishes hadn't made it to the dishwasher yet, oh dear.
I had to leave room for the light switch, which made room for some other items:Cordless phone on a quickly-built angled stand, notepad, CO detector, the spot where I routed a shelf support, thinking the switch was a foot higher on the wall.... Oops! That gray thing is not a firearm; it's a solid-plastic training aid. But it couldn't stay there, as even it was too much temptation during junk phone calls. The other gadget is a tiny, French-made telegraph key. Quite a nice little key, in fact. Here, perhaps it will be handy if we receive any telegrams.

I put the short shelf, the vertical that supports it and the two shelves it is connected to together as a unit before proceeding with the rest of the assembly. This simplified the process considerably, though I am starting to think I need two more 4' long pipe clamps. (You can never own too many clamps).

There are two more doorways to bridge and I will have encircled the room. (And two boxes of books to be shelved). However, the shelves on the opposite wall are only temporary; it has an archway into the living room and my plan is to build new shelves on each side and at least one shelf along the wall above the archway. At least one of the temporary shelves will be moved to the living room: with the science fiction all shelved, there will still be science, technology, biography and history books in boxes, plus some mysteries (Sherlock Holmes, Travis McGee, Amelia Peabody) and a few others.

I'm considering a frieze of toy soldiers along the molding over the kitchen door; or is that too quirky?

Wednesday, November 10, 2010

BOOKSHELVES

I'm slowly working on covering every wall of the dining room here at Roseholme* Cottage with bookshelves. The corner between the recently-built window seat and the doorway to the kitchen was next up. Here's what I started with: A sad old set of butt-jointed Luan shelves, slapped together from stock lengths in an excess of enthusiasm and lack of funds over 15 years ago. They don't even have stabilizing pieces (we'll get to that); side stress could fold them up. All that wasted space! (And those newspapers have gotta go). Step One: Measurements and a worksheet. This one's fancied up with colored ink but the basic notion is to set down the essential dimensions. I already know 8' lumber will clear the ceiling, so a plan view (top left) and a simple reminder of the shelf spacing (bottom left) plus a detail of the routed joints and some scratch calculations are all it takes. (I left woodscrews off the bill of materials. 1- ¼" flathead wood or drywall screws, #8 or #6 will do. They mostly hold it together while the glue dries).

The shelves are easy to run off with a power saw. Stabilizing pieces are just additional shelves, one mounted vertically at the top back, the other at the bottom, set in 1-½" from the front edge as a kind of kick plate (a refinement is possible here, which I'll get to later). They help the shelves resist side stress. It works pretty well -- here they are, assembled and stacked on their sides in the garage:The verticals are another story. The actual measurement is 95-¾" to allow cutting the bottom square and it's not uncommon to end up with an eighth of an inch or so left over at the top. Leave it be 'til the shelves are all together; it's easy enough to trim away with a sharp saw. Establish a consistent measurement point for the spacing (my worksheet reminds "bot. to bot.") and lay with out with a tape and square. Mark it right on the wood. The router will cut the marks away.

Next step is to cheat: take a scrap of wood with one good edge and clamp another scrap to it as a guide, square with the edge. Make a mark along it, then take your router (you'll want a ¾" cutter for nominal 1" lumber) and plow a groove, bearing the router base against the guide. Once you're done, measure from the guide to the nearest and farthest edges of the groove and make two spacers from scraps of the shelf material, one each of those widths. You use those with your marked locations to set up a guide for the router! Rout a notch for each shelf -- don't forget to do them for the stabilizing pieces, too. The one at top, back will have to be longer than the lumber is wide by half the diameter of the router bit, unless you are willing to do some chisel work to make a nice square corner. (I had to do so by accident, with a pocket knife: I didn't catch that I'd done one of them too short until I was assembling the shelves and glue was setting! White pine is soft enough it wasn't difficult to make a few quick slices and get everything to fit). I do rough sanding as I rout, a quick scrub to round the corners next to the groove and another to slightly chamfer the edges of the groove itself.

When you've got all the pieces cut and routed, it's assembly time. A flat and level floor is a great help in this, as is a wooden mallet and some wood blocks to buffer the shelves from the mallet. A couple of pipe clamps longer than the shelves are wide are a great help; you can do without if you must. Or if you've several, the assembly can be glued, clamped and pinned together with finishing nails or even dowels. I usually start with one side, with the shelves laying on their back, tapping the shelves in place from the top to the bottom and securing them with screws as I go, then move to the other side. One or two screws per shelf per side hold it together. The routed grooves will tend to pull everything square. I use ordinary, inexpensive dimensional lumber, and sort out the worst warped ones, but they're never perfect. Check to make sure it is square as you go!

Once it's done, if there's any need to clear baseboards, those cuts will have to be made. If it won't show, a simple rectangle (7" by 1-½" for the old-fashioned ones at Roseholme) will do. I used a semi-coped one for the quarter-round and baseboard on the side next to the kitchen door: (A little blurry, sorry). All the trim cuts were done with a Japanese backsaw, which cuts fast and leaves a smooth edge. The shelves are only 5-½" wide, so I end up with a 1-½" gap at the bottom; I could have used a wider board, or I can cover that with another piece. At present, it's handy for retrieving cat toys.

A quick sanding/scraping to remove any rough spots and slightly round the edges, and it's ready for the finish (if any; I leave them raw and let the pine pick up some color. Plus I don't have to worry about the finish affecting the books).These are very tall, narrow shelves. I secure them to the walls when possible. The photo has arrows pointing to the (ugly) angle brackets presently holding the shelves to the door and window frame, and to the screws that hold the shelves to hidden blocks at the corner where they meet. A wedge under one upright takes care of a slight irregularity in the floor; careful pocketknife work makes it less obvious.

And there you are: bookshelves! The design started with one from Nomadic Furniture, meant to be cut from a single 4' x 8' sheet of plywood; I've always built them from dimensional lumber instead. The routed joints for the shelves are a later refinement that really helps stability and speeds assembly. The book is a very handy source for homemade furniture ideas; it's a bit hippieish but the stuff works, so who cares? It's got a lot of basic measurements for furniture design, too. My "copy" is just that, handwritten notes and a few photocopied drawings. I was happy to discover it and its sequel have been reprinted in one volume! (Buy it via the Amazon link at Tam's and do a blogger a favor).
______________________
* The name is actually a reference to a grant of arms to the family name, a "naturally-colored" rose on a silver background. Does that mean the rose is white, or red? I don't know.