"Big Nick," KC9KEP, does amazing work. He's been building classic late-1930s/early-'40s ARRL Handbook receivers (plus some others) and good-looking as the League originals were, his are even better. If you like building your own ham gear, he's a inspiration.
On the other side of the Atlantic and a generation or two more recent in technology, the clever Tim Walford (Walford Electronics) has been turning out very nice kits for some time. I've built one, a nice 80-meter QRP transceiver, and it was fun to build and fun to use on the air. He's added an antenna tuner and his answer to the problem of providing a variable inductance is one of the best ideas I've seen. Go to this page and scroll down to Antenna Matching Unit. Yes, he's using a short piece of ribbon cable and a set of short traces on the PC board to make a coil! His notes say that particular solid-wire jumper went unavailable, so he's redesigning it for an alternative coil and I'll be interested to learn what that will be. Good equipment from a good guy.
Monday, September 16, 2013
Friday, September 6, 2013
MODERN 36" PENNYFARTHINGS: COKER AND QU-AX
At the WARMfest last weekend, I met a fellow riding a Coker Wheelman pennyfarthing, with the same wheel size as my QU-AX.
Both have similar rake angles, pneumatic tires and the main wheel is a yard across -- but that's about it for similarities:
They're both nice-looking ordinaries and attract a lot of interest. While the Coker does have a brake on the main wheel, the rider I met admitted he doesn't use it much. Meeting him made me wish I'd've ridden mine to the event; there aren't so many of us on pennyfarthings, still less the modern versions.
Both have similar rake angles, pneumatic tires and the main wheel is a yard across -- but that's about it for similarities:
![]() |
| Coker at left, QU-AX at right |
Sunday, September 1, 2013
MILLEN 92201 TRANSMATCH JUNIOR
What's a transmatch? It's a device for matching a transmitter (or a receiver) to an antenna, or perhaps the other way around. It's an impedance-transforming network. They're pretty common in amateur radio and you can even find high-power versions at some MF AM and SW stations.
This one was made by the perfectionist James Millen Corporation, their "Junior" model (manual for 92201 here), rated at 150W continuous, 300W peak:
Internal construction is as clever as most Millen devices. The split-stator input variable condenser sits on top of a little copper-plated box and the input connector is at the rear-wall end of the box. What's in the box? A standing-wave bridge, a pair of directional couplers for providing equal-amplitude coupling-value samples of forward and reflected power. They go to a front-panel selector switch. Set the front-panel meter to full-scale in "Forward," flip it to "Reverse" and adjust the tuning controls for the lowest reading. Voila, matched!
(I removed the cover for these photographs. It matches the front panel.)
The output capacitor stands on ceramic pillars: both sides are at an RF potential above ground.
On the back panel, an extra connector! It connects to a one-turn loop coupled to the main coil (see the manual), and provides a sample of the signal for an oscilloscope or keying/modulation monitor.
Found on an auction site for a remarkably low price, this example is unrestored. Typical of Millen products, it is overbuilt and will only need attention if the meter movement or passive components in the SWR bridge (two diodes, two resistors, a fixed condenser or two) are damaged.
This one was made by the perfectionist James Millen Corporation, their "Junior" model (manual for 92201 here), rated at 150W continuous, 300W peak:
Internal construction is as clever as most Millen devices. The split-stator input variable condenser sits on top of a little copper-plated box and the input connector is at the rear-wall end of the box. What's in the box? A standing-wave bridge, a pair of directional couplers for providing equal-
(I removed the cover for these photographs. It matches the front panel.)
The output capacitor stands on ceramic pillars: both sides are at an RF potential above ground.
On the back panel, an extra connector! It connects to a one-turn loop coupled to the main coil (see the manual), and provides a sample of the signal for an oscilloscope or keying/modulation monitor.
Found on an auction site for a remarkably low price, this example is unrestored. Typical of Millen products, it is overbuilt and will only need attention if the meter movement or passive components in the SWR bridge (two diodes, two resistors, a fixed condenser or two) are damaged.
Labels:
RADIO
Friday, August 23, 2013
GENERAL RADIO KNOB AND INDEX
It showed up ay a popular auction site: a genuine GR calibrated knob:
In the original box (love those fonts!):
With an "index:"
Actually, three of them, and that's the part you never see. Sure, it's just (just?) a line scribed on a piece of metal, the same nickel-plated brass as the calibrated skirt, but it's mounted on a little leaf spring and shaped to ride right on the edge of the calibrations. It beats the usual crude expedients by a long ways.
There's one fancier replacement, a vernier scale that allows reading the dial to a tenth of a division. Either one is a nice thing to have when the urge to build some interesting device happens to strike.
In the original box (love those fonts!):
With an "index:"
Actually, three of them, and that's the part you never see. Sure, it's just (just?) a line scribed on a piece of metal, the same nickel-plated brass as the calibrated skirt, but it's mounted on a little leaf spring and shaped to ride right on the edge of the calibrations. It beats the usual crude expedients by a long ways.
There's one fancier replacement, a vernier scale that allows reading the dial to a tenth of a division. Either one is a nice thing to have when the urge to build some interesting device happens to strike.
Saturday, August 3, 2013
INDIANA STATE FAIR RETROTECH
The Pioneer Village area of the Indiana State Fair is a hotbed of retrotech and, as it turned out, a few vendors thereof as well. I passed up a well-worn set of radio headphones, 1920s or '30s vintage, but these small items caught my attention and had to come home:
The pens, by the Bridgeport Pen Co. of the Connecticut town of the same name, are an unusual design, sized for sign or poster work and intended to be used with India-type drawing ink. The narrowest one is turned so you can see the corrugated brass ink retainer. They show up fairly often.
The pencil saver is a clever gadget dating back to Victorian times, allowing you to use a pencil right down to the stub -- and in the stored position, it keeps the point out of harm's way. This one is a bit newer, 1930s perhaps, with a well-petrified eraser. There's a little drawing of a cave entrance on the label, with the legend, "Souvenir of Mark Twain Cave, Hannibal, Mo." The entrance still looked the same in a 1956 photograph and may not be much changed even today.
The trammel (or "beam compass"), made by Feranco Products (Ferance Construction Co. of Penfield, N.Y.) is a very small example; large trammel points that clamp on a framing square or yardstick are more commonly seen. Neither ZIP nor Zone code on the address and the points proper look to be zamak -- 1930s though 1950s? This one easily scribes circles up to 12 inches in diameter. The previous owner left the lead properly sharpened, too. There's a set of actual scribe points (the other end has a stepped drafting type), extra lead and spare clamp screws along with their G U A R A N T E E. It may have originally contained more beams, which the clamp screws would have held together for making larger circles.
Prices? Including tax, I paid more for lunch (a ribeye sandwich and a glass of pop) than I did for any of it -- $10 total for the three pens, the same for the beam compass, $4 for the pencil saver. This compares rather favorably with asking prices online and these are useful items.
The pens, by the Bridgeport Pen Co. of the Connecticut town of the same name, are an unusual design, sized for sign or poster work and intended to be used with India-type drawing ink. The narrowest one is turned so you can see the corrugated brass ink retainer. They show up fairly often.
The pencil saver is a clever gadget dating back to Victorian times, allowing you to use a pencil right down to the stub -- and in the stored position, it keeps the point out of harm's way. This one is a bit newer, 1930s perhaps, with a well-petrified eraser. There's a little drawing of a cave entrance on the label, with the legend, "Souvenir of Mark Twain Cave, Hannibal, Mo." The entrance still looked the same in a 1956 photograph and may not be much changed even today.
The trammel (or "beam compass"), made by Feranco Products (Ferance Construction Co. of Penfield, N.Y.) is a very small example; large trammel points that clamp on a framing square or yardstick are more commonly seen. Neither ZIP nor Zone code on the address and the points proper look to be zamak -- 1930s though 1950s? This one easily scribes circles up to 12 inches in diameter. The previous owner left the lead properly sharpened, too. There's a set of actual scribe points (the other end has a stepped drafting type), extra lead and spare clamp screws along with their G U A R A N T E E. It may have originally contained more beams, which the clamp screws would have held together for making larger circles.
Prices? Including tax, I paid more for lunch (a ribeye sandwich and a glass of pop) than I did for any of it -- $10 total for the three pens, the same for the beam compass, $4 for the pencil saver. This compares rather favorably with asking prices online and these are useful items.
Wednesday, July 31, 2013
ELECTRO-VOICE V-1 RIBBON MICROPHONE
Is there any mellower microphone than a good ribbon? These velocity mics are strikingly different to most other transducers -- for one thing, the ribbon is operating above its resonant frequency, rather than below it. No other microphone works that way and it's part of their warmth and lack of "proximity effect." "off mic" sound even at fairly large distances, as long as the speaker is on-axis, facing one of the wider sides. (I was wrong earlier, ribbon mics actually have a lot of up-close bass-boosting proximity effect. I never worked one very closely, they're very sensitive to plosive sounds.)
A long time ago, I owned an RCA 44BX, the iconic broadcast microphone. I fell on hard times and sold it (hoping to buy it back some day) and the mic subsequently had a hard life (damaged ribbon, some sort of plating job, paperweight) until I lost track of it. So when a "baby brother" (about half-size) made by Indiana's own Electro-Voice* turned up for just over $100 at an antique mall, I bought it on sight.
Of course it was dead. Responded slightly to a fingernail tapped on the frame but not at all to sound, which is a sure sign the ribbon is against a pole piece, or jammed up with lint. Close examination showed the ribbon well out of alignment and crumpled. I wrapped it up and set to one side, thinking some day I'd nerve up to try rebuilding it--
Fast-forward a couple of years; browsing for a microphone for work, I stumbled across AEA, who still make classic RCA microphones. They're quite expensive and worth every cent.
They're also beautiful.
If you look carefully at their home page, you'll see a "repair form" link. And not just the RCA types; they sell and support the STC/Coles mics made in the UK, too. So I called and asked their ace service guy (fixing ribbon mics is the darkest of Dark Arts, combining watchmaking, ship-in-a-bottle skills and fine-arts-grade audio talent, and that's just for a start) if he'd consider fixing an Electro-Voice V-1?
"There's a V-2 on my bench right now, so that'd be a yes."
I filled out the form and dithered for several weeks. This could be costly! On the other hand, while there are several firms making ribbon mics these days (with varying degrees of success. AEA is the gold standard they aspire towards), repairing them is a much scarcer skill and very nearly died out once already. Shipped the mic and crossed my fingers.
Several weeks later, at the Dayton Hamvention of all places, my celphone rang. AEA: "Hey, what's that weird connector on your V-1? We haven't got anything that will mate with it!"
I had to laugh. "Sorry, I forgot it's only 1937 in my basement. It's an early hi-Z connector, used on mics and test gear through the 1960s. You've called me at the one place where I can be sure of finding one; I'll make up an adapter and send it to you."
The V-1 uses a "spot" connector. All later E-V ribbon mics were selectable-impedance and had either an unterminated cable or one of the early multi-pin connectors.
About a month later, they called with my bill. New ribbon, new magnets, new rubber shockmount, alignment and test, bench time-- I braced for the bottom line.
About $150. Well under what I was anticipating.
Mind you, by their standards, the little E-V is a fairly undemanding repair and the cast-zinc base prevents much cosmetic refinishing (zamak is unpredictable stuff and only gets more so the more you mess with it). The end result looks better than it did when I bought it, with the grill all clean and shiny, and sounds great. Output's not very high -- that's a small ribbon, after all -- but well within what a decent mic preamp can deal with.
I'm tempted to ask them if they'll look at my Amperite ribbon mic:
These were, shall we say, built to a price. This one hasn't suffered a lot of zinc-alloy creep, but it's seen entirely too much knocking around and the guy I bought it from, despite his assurances to take exceeding great care, packed it for shipment like you'd pack a brickbat: no padding at all. ...I think maybe I'll wait a bit before sending this in. And maybe bake some cookies to send along with it by way of apology, too.
Electro-Voice V-1: good mic, back in service.
AEA: They've made me even more of a fan than I already was!
_____________________________________________
* E-V started out in South Bend, eventually jumping the border for Buchanan, Michigan. They've built good mics since Day One, if you ask me.
A long time ago, I owned an RCA 44BX, the iconic broadcast microphone. I fell on hard times and sold it (hoping to buy it back some day) and the mic subsequently had a hard life (damaged ribbon, some sort of plating job, paperweight) until I lost track of it. So when a "baby brother" (about half-size) made by Indiana's own Electro-Voice* turned up for just over $100 at an antique mall, I bought it on sight.
![]() |
| "After." The base is not original. |
Fast-forward a couple of years; browsing for a microphone for work, I stumbled across AEA, who still make classic RCA microphones. They're quite expensive and worth every cent.
They're also beautiful.
If you look carefully at their home page, you'll see a "repair form" link. And not just the RCA types; they sell and support the STC/Coles mics made in the UK, too. So I called and asked their ace service guy (fixing ribbon mics is the darkest of Dark Arts, combining watchmaking, ship-in-a-bottle skills and fine-arts-grade audio talent, and that's just for a start) if he'd consider fixing an Electro-Voice V-1?
"There's a V-2 on my bench right now, so that'd be a yes."
I filled out the form and dithered for several weeks. This could be costly! On the other hand, while there are several firms making ribbon mics these days (with varying degrees of success. AEA is the gold standard they aspire towards), repairing them is a much scarcer skill and very nearly died out once already. Shipped the mic and crossed my fingers.
Several weeks later, at the Dayton Hamvention of all places, my celphone rang. AEA: "Hey, what's that weird connector on your V-1? We haven't got anything that will mate with it!"
I had to laugh. "Sorry, I forgot it's only 1937 in my basement. It's an early hi-Z connector, used on mics and test gear through the 1960s. You've called me at the one place where I can be sure of finding one; I'll make up an adapter and send it to you."
The V-1 uses a "spot" connector. All later E-V ribbon mics were selectable-impedance and had either an unterminated cable or one of the early multi-pin connectors.
About a month later, they called with my bill. New ribbon, new magnets, new rubber shockmount, alignment and test, bench time-- I braced for the bottom line.
About $150. Well under what I was anticipating.
Mind you, by their standards, the little E-V is a fairly undemanding repair and the cast-zinc base prevents much cosmetic refinishing (zamak is unpredictable stuff and only gets more so the more you mess with it). The end result looks better than it did when I bought it, with the grill all clean and shiny, and sounds great. Output's not very high -- that's a small ribbon, after all -- but well within what a decent mic preamp can deal with.
I'm tempted to ask them if they'll look at my Amperite ribbon mic:
These were, shall we say, built to a price. This one hasn't suffered a lot of zinc-alloy creep, but it's seen entirely too much knocking around and the guy I bought it from, despite his assurances to take exceeding great care, packed it for shipment like you'd pack a brickbat: no padding at all. ...I think maybe I'll wait a bit before sending this in. And maybe bake some cookies to send along with it by way of apology, too.
Electro-Voice V-1: good mic, back in service.
AEA: They've made me even more of a fan than I already was!
_____________________________________________
* E-V started out in South Bend, eventually jumping the border for Buchanan, Michigan. They've built good mics since Day One, if you ask me.
Labels:
AUDIO
Tuesday, July 23, 2013
JOHNSON VIKING CHALLENGER: INDY HAMFEST SWAG, PART FIVE
E.F. Johnson built a wide range of amateur radio transmitters (among other things), starting in the 1920s. They hit their stride with the postwar ham radio boom and continued through the early days of SSB. Every last one of the postwar rigs was a "Viking" something-or-other, which I suppose isn't a huge surprise for a company based in Waseca MN, up there where the descendants of Vikings farmed the land. The first two, delightful behemoths, were the Viking I and Viking II, but after that, there were Adventurers, Rangers, Navigators, Invaders(!) and the Challenger:
There was one on a table at the Indy Hamfest, priced over $100 (a bit high, I thought) but the guy was starting to pack up and when he noticed my interest, suggested the price was highly negotiable. I named a rather low one and he was okay with it -- even added a microphone.
It's a CW/AM rig, the latter provided by screen-modulating a couple of TV sweep tubes (6DQ6) with a miniature beam tetrode audio tube (6AQ5). One does not expect high fidelity from this kind of arrangement but given a decent load, it should be adequate.
The knobs for bandswitch, "excitation" (grid drive) and mode switch are notably missing pointers to tell you where they're set. The originals were sort of subtle, white plastic pieces glued in at the bottom of the knobs, and I'll have to work out a replacement.
Does it work? The seller claimed it did -- it's got Johnson's poorly-documented "push to talk" modification (no schematic, just a step-by-step and partial pictorial) and a connections-unknown mic socket, so I'll want to trace all that out first, clean it up and then, perhaps, power it up via The Gadget.
What's The Gadget? That's a post for another time!
There was one on a table at the Indy Hamfest, priced over $100 (a bit high, I thought) but the guy was starting to pack up and when he noticed my interest, suggested the price was highly negotiable. I named a rather low one and he was okay with it -- even added a microphone.
It's a CW/AM rig, the latter provided by screen-modulating a couple of TV sweep tubes (6DQ6) with a miniature beam tetrode audio tube (6AQ5). One does not expect high fidelity from this kind of arrangement but given a decent load, it should be adequate.
The knobs for bandswitch, "excitation" (grid drive) and mode switch are notably missing pointers to tell you where they're set. The originals were sort of subtle, white plastic pieces glued in at the bottom of the knobs, and I'll have to work out a replacement.
Does it work? The seller claimed it did -- it's got Johnson's poorly-documented "push to talk" modification (no schematic, just a step-by-step and partial pictorial) and a connections-unknown mic socket, so I'll want to trace all that out first, clean it up and then, perhaps, power it up via The Gadget.
What's The Gadget? That's a post for another time!
Subscribe to:
Posts (Atom)












